Silicone foam handle with foam hole uniform, extremely elastic;
Soft, good elasticity, kink resistance without deformation;
The sleeve product has good anti-slip performance and good resilience;
Aging resistance, with higher tear strength and superior electrical performance;
High transparency, unchanged yellow at room temperature, no spray, no white, no fading,
The compression deformation is small, the product color is rich and colorful.
The rubber foam belt is made of FDA-grade silicone raw materials with high-quality foam accessories, extruded by special process, the product has rich color and excellent visual effect, and is the best material in contact with human skin. Now, compared with EVA, NBR, PU, it has higher environmental performance, more reliable safety and longer service life. Silicone branch products through strict testing, can meet ROSH, FDA and other certifications;
serial number | project | standard | index |
1 | density | GB/T6363-2009 | 0.2~1.0g/cm3 |
2 | water absorption | QBT/T2669-2004 | ≤5% |
3 | Temperature use range: low temperature toughness |
ASTM D 1056 | ≤55°C |
4 | Temperature range of use: continuous use of the highest temperature |
SAE J 2236 | ≥200°C |
5 | Compression permanent change (22hrs70°C) | GBT6669-2008 | ≤1% |
6 | Compression permanent change (22hrs100°C) | GBT6669-2005 | ≤5% |
7 | Tensile strength (Mpa) | GB/T6344-2008 | ≥0.8Mpa |
8 | Elongation at break (%) | GB/T6344-2008 | ≥50% |
9 | Flame retardant grade (UL-94) | GBT10707-2008 | HB~V-0 |
Flame Spread Index (Ls) | ASTM E 162 | ≤25 | |
Smoke density (Ds) | ASTM E 662 | ||
Tested in 4.0 minutes | ≤50 | ||
Tested in 1.5 minutes | ≤20 | ||
Pollutant gas level | SMP-800C | PASS |
The above performance products can be customized according to requirements
Regular products are shipped immediately after ordering, and special specifications are customized
Any color can be adjusted on demand
The surface of silicone products can be sprayed, screen printed, laser engraved, transferred